Skip to content

RF With Care

Land of The Freespace, Home of The Waves

  • Home
  • About
    • Business Profile
    • Services
      • Antenna & MW Design
      • Hardware And Manufacturing
      • Algorithm Development
      • Programming
    • CV
  • In House Designs
  • Blog
  • Contact

Tag: RF

Building Bridges Pt. 2 – The Curse Of The Open Source

February 28, 2023April 16, 2023 GadiCAD, CEM, FDTD, KiCAD, Matlab, Octave, OpenEMS, Programming, RF, SimulationLeave a Comment on Building Bridges Pt. 2 – The Curse Of The Open Source

The adventure continues! Now with S-Parameters and pretty 3D drawings

Building Bridges Pt. 1 – How Would You Solve This?

February 21, 2023February 21, 2023 GadiCAD, CEM, Computational Geometry, Electronics, Engineering, FDTD, KiCAD, RFLeave a Comment on Building Bridges Pt. 1 – How Would You Solve This?

Trouble with computational geometry. How would you solve it?

RADAR Pt. 2 – A Practical Explanation

February 13, 2023February 14, 2023 GadiElectronics, Engineering, Matlab, Octave, Radar, RFLeave a Comment on RADAR Pt. 2 – A Practical Explanation

A practical example of how pulses are transmitted and received. A bit about modulation, demodulation and avoiding everything that is mildly complicated

Some Stuff About RADARs, pt. 1 – Range, Power And Doppler

February 5, 2023February 15, 2023 GadiOctave, Radar, RF, UncategorizedLeave a Comment on Some Stuff About RADARs, pt. 1 – Range, Power And Doppler

Just the tip of the iceberg on how RADARs work

Ports – From 3D to 0D

June 1, 2019October 14, 2019 GadiCEM, Eigenmode, Electronics, Engineering, FEM, KiCAD, Octave, Programming, RFLeave a Comment on Ports – From 3D to 0D

Disclaimer: This issue is boring. Not only because it has nothing to do with Cyber, AI, machine learning, etc. (nor do most of the things I do and write about). It’s boring because it has to do with only one…

Read More→

The Perils of Port Extensions

April 23, 2018October 14, 2019 GadiCAD, Electronics, Engineering, KiCAD, QUCS, RFLeave a Comment on The Perils of Port Extensions

This post concerns a much more simplified version of the previous one. Last time we dealt with an arbitrary length line, with an unknown characteristic impedance. For that matter, a double length line de-embedding structure was suggested. In this post,…

Read More→

De-Embedding 2 Whole Degrees of Freedom

March 17, 2018October 14, 2019 GadiCAD, Engineering, KiCAD, Matlab, QUCS, RFLeave a Comment on De-Embedding 2 Whole Degrees of Freedom

In the last post we discussed de-embedding a simple transmission line, namely a phase shifter and attenuator. Surprisingly, most structure that we might need to de-embed will be far from that, to say the least. To maintain a methodical approach,…

Read More→

Basic De-Embedding, 1st Order Model

February 5, 2018October 13, 2019 GadiElectronics, Engineering, Matlab, QUCS, RFLeave a Comment on Basic De-Embedding, 1st Order Model

It occurred to me recently that although I named this site RF with care (for reasons I definitely cannot recall any more), I have not really written here anything RF or EM related in any way. So to start it…

Read More→

Posts pagination

Previous 1 2

Social Media

  • Email
  • LinkedIn
  • Phone

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Copyright © 2025 Gadi Lahav. All rights reserved. Eduberg by iThemer